Hjem  | ... | Tenningsmodul
Hjem Our Products Ignition and electric parts Tenningsmodul
Tennboks Ladetrykkstyring
MSD Ignition

Tennboks Ladetrykkstyring

MSD Ignition : 65233

Artikkelnr: MSD65233
High conversion efficiency ensures minimal heat generation and maximum spark energy output with less current draw from the battery - (Highly efficient Ignition, minimum heat and max spark energy with less current draw) High RPM operation and maximum output using the Blaster HVC, PN 8252 or HVC II, PN 8253 Powerful capacitive discharge of multiple sparks improves performance Consistently high spark energy of 135mJ to 150mJ for every firing, from idle to redline RPM Increase spark series duration lasts for 18 of crankshaft rotation Easily installs on 4, 6, 8-cylinder engines with distributors Operates on most 7 to 28 volt electrical systems Connects to points, magnetic pickups, and Hall/Crank Input distributors Bluetooth connectivity to Mobile app interface for settings and monitors MSD CAN communication for easy connectivity to MSDView using a CAN MSD Hub and Power Grid USB or CAN-USB Bridge 89982 product Straight USB port to easily connect to MSDView using a laptop Fully protected against an open coil, shorted coil & open load Compact design full MSD power Quickens throttle response & improves starting Tach Output Launch, Burnout, and Step Retard activation inputs available. This ignition box has a built-in tri step RPM rev limit controlled by the mobile app Mobile app available settings: Step retard value, Launch RPM value, Burnout RPM value, Max (Race) RPM Value Programmable Step Retard: On Ramp time, Off Delay, Off Ramp Time, Engine RPM for activation Programmable Start Retard through rotary switches: 0, 10, 20 degrees Programmable cylinder selection through rotary switches: 4, 6, and 8 cylinders Alerts and monitors available High level of security connection from phone to Ignition box (encryption) including sequence in push button implementation Maximum programmable retard of 35 degrees Programmable timing curves in 2D Plots or 3D tables (RPM vs Timing vs MAP Pressure) - You can plot the 3D graph and edit a table 20x20 either from Mobile app (Phone) or from MSDView (laptop) Programmable Launch Timing (Seconds vs degrees after launch wire activation) MAP sensor interface up to 400 kPA (58 PSI / 4 Bars) Capable to program cylinder selection and start retard without a computer or app for old school racers (like 6425 or 6428 box)
1 i Sverige-lager Leveringstid 2 til 4 uker.
kr 7 714,00
Inkl. MVA
Vis priser
Prisinformasjon
Minimum antall 1 Anb. pris Ink. mva kr 7 714,00 Anb. pris Eks. mva kr 6 171,20 Rabatt 0.0000 % Netto inkl. mva kr 7 714,00 Netto eks. mva kr 6 171,20

Nylig besøkte produkter